TheRealCookie

Okay, but is this realy the only way to show “special opening hours”?

That would mean I still have to enter the data at google business AND on my page. What is the use of the plugin if I have to enter the opening hours anyway?

Thx! Clearing the Cache was the solution. How easy… Thx. ??

Thx for your reply.
I tried both already before asking: I used the IP6 address and also I removed any API restriction. I’m still stock…. ??

As I said: no extended licence – no support – not even writing a message to you folks.

I spent already to much time for that – what other plugins can do in seconds via customer panel.

me too

This explains my experience… ok. Sad, but more important is to know whats goning on. Thx!

In the meantime I changed and tried (almost) EVERY combination in the websettings of the printer…

The one and only thing to get WP connection is to disable(!) port 9101.

In the firewall side I completely exposed the printer to the internet(!)
Tried also port forwarding 9101 and 9100.

Hey Guillermo,

the Fritzbox is a Inter-Router with Firewall posibilites.
Should I try to do some port forwarding?

Regarding the settings in the printers web interface: It definitly interfears with the connection to the WP Server. If direct oder indirect – somehow it does.

If I switch OFF the 9101 port the printer stays connected to the WP Server.
Sure, it may related to the FW setting in the fritzbox.

Hope’ to find a solution to use WP plugin and iZettle simuntaniouly.

BR!

• This reply was modified 2 years, 11 months ago by TheRealCookie.

I disabled #9100/9101 port and WordPress stays connected! ??

BUT

In our test case the printer is also connected to iZettle app. Now iZettle doesnt find the printer any more. ….
(For further dev and custom projects i will use a dedicated printer for wordpress)

Is enabling port 9101 a “no go” for the wordpress plugin? Is this a specific “thing” only with the IFBD-HI01X/02X? (and no isse with eg the mC-Print3)

• This reply was modified 2 years, 11 months ago by TheRealCookie.

Some problems again. ??
It seems to be related to these settings: What are the right settings?

System Configuration
Network
Web Refresh Interval Time (Sec.) 5
#9100/9101 port ENABLE
#9100 Multi Session ENABLE
#9100 Data Timeout (Sec.) 0
LPR DISABLE
TCP Keep-Alive DISABLE

Update: I changed the FritzBox settings for the Printer to “Allow the device to set ports by itself” (free german translation, similar meaning).

For the last 10min. Connection is still alive. ??

I’ll response / keep you updated…

Hey Lawrence,
thx again. I had no time last days to continue on this issue.
I followed the “system permission” think… There wasn’t a star-cloudprnt folder. I’m afraid to say, that till now I left the username and password fields in the CloudPRNT section of the printer empty. Now I did enter a new admin account of my wordpress installation. -> I’m at home now and can’t see the printer, but it _seems_ to be, the printer is working now. (There is a goodlooking print protocoll and now there is a star-cloudprnt folder now)
Is it right to enter a WP user login at the cloudPRNT settings?
BR!
Jan

Thx Again!
The polling is (and was) set to 5sec.

I also tried to print directly from the order management in the WP Woocommercebackend (there is a CloudPRNT button) and also by changing the order status all the way.

Look at the last line in the code block on my first post. THAT time there was a queue! Looked good, but printer never printed that out. Now no queue is visible…
??

Thx a lot.
The server is a rented root server, caching disabled.

I changed some settings at the printer … actually dont what, but now the connection stays alive. But still no prints…
And now there is no printer queue? Before the printjobs where shown there…

BTW: The communication to the Star Micronics Cloud is working. So the firewall/router might me not the problem…