RaymondDay

It must be the “do-release-upgrade” because I have WordPress in stall on another server that I never did the “do-release-upgrade” on and it’s all updated besides the do-release-upgrade and I tested dragging and dropping a 8 min. video on that and it works. I did a test back on my main WordPress and I still get this “Cannot read properties of undefined (rading “get”)

I guess some Ubuntu update will fix this but it has not yet.

• This reply was modified 1 month, 1 week ago by RaymondDay.

Can drag and drop a video that is about less then 10000G in size and it works but ones over that I guess about when they upload about 10000G it pop’s up that error:

“Cannot read properties of undefined (reading ‘get’)”

Then disappears.

Then the video never gets uploaded.

• This reply was modified 2 months, 2 weeks ago by RaymondDay.

It is in MP4 and I got the php size so it don’t give any error like that.

I tested it again today and got the same error. I did this all most every day before no problem.

To get the video in there I use WinSCP and then the plug in Media Sync and can said upload video from Media library then. That works. But I like to just drag and drop it like I all ways did before.

I guess it’s the block editor how do I know. But I can move lines and photos and videos up or down the text.

I don’t know what embed means. I can pick upload video and same as if I drag and drop it.

I could do this a lot but now can’t only after I upgraded Ubuntu with a do-release-upgrade command and rebooted. Just as the video is about to get done it pops up that error.

Just put a screen shot on my google photos if a link will work in here. the upper part is were the video would go but you can see the error the pops up in the bottom left corner just as the video is done it don’t upload and get this error for a few sec.

Did Chat GPT for help and I did lots to fix it but none work. Chat GPT starts to repeat it’s shelf telling me to do the same things that don’t work.

That’s why I posted here for help

I got WP 6.2.2 and this had not worked in like 2 years as it use to after a WP update. Back then if I enabled this then my WP could not read it. So I had it disabled a lot.

Today it had a update and still it don’t work. Can’t go down my the month then day on a list.

It’s still saying this “There has been a critical error on this website.”

I can hit the back arrow turn off Collapsing Archives and don’t get this error any more.

I like this plug-in and hope can fix it.

Got WordPress installed on a Nanopi-neo to backup my main WordPress and on Writing Settings Formatting did not appear I worked on it a lot did all I said in here and it did not work.

What made it work was when I copied the database from my main WordPress to it with “Import” ran the WordPress Importer after it was done then the Formatting showed up.

Not sure why. But wanted to post it here because that fixed it.

WordPress run’s putting good on this tinny Nanopi-neo. A little slow but not to bad.

Looks like this when I log in on the RS232 or can log in with SSH too.

Ubuntu 16.04.7 LTS NanoPi-NEO ttyS0

NanoPi-NEO login: root
Password:
Last login: Tue Jan 26 02:59:42 EST 2021 on ttyS0
_____ _ _ _ _____ _ _____ ____
| ___| __(_) ___ _ __ __| | |_ _| ____| | | ____/ ___|
| |_ | ‘__| |/ _ \ ‘_ \ / _` | | | | | _| | | | _|| |
| _|| | | | __/ | | | (_| | | |_| | |___| |___| |__| |___
|_| |_| |_|\___|_| |_|\__,_|_|\__, |_____|_____|_____\____|
|___/

Welcome to Ubuntu 16.04.7 LTS 4.14.111
System load: 0.08 Up time: 8 hours
Memory usage: 49 % of 491Mb Swap usage: 22 % of 511Mb IP: 192.168.86.105
CPU temp: 48°C
Usage of /: 9% of 28G

* Documentation: https://wiki.friendlyarm.com/Ubuntu
* Forum: https://www.friendlyarm.com/Forum/

root@NanoPi-NEO:~#

The WordPress media it on a 1TB SSD on it with USB 2.0. Got videos, audio, and photos on it. a link to it within WordPress.

-Raymond Day

Not sure but it went back to how it was.

Used Webmen to uninstall php went under software packages on the left side.

Then did a search for php it came up with a lot but I just clicked on:

php-xml 7.4+79+0~20201210.30+debian10~1.gbpedaf15 P-T all DOM, SimpleXML, WDDX, XML, and XSL module for PHP [default]

Said to uninstall and click all settings and dependencies. It took a while but then came back and found no php at all in Webmin.

Then I reinstalled it like in the last 3 lines I said in the other post here.

It is working very good now.

So mainly had to uninstall php with all it’s setting too and reinstall it.

-Raymond Day

I think it something to do with PHP. I upgraded from 7.3 to 7.4 here is the history of my command line.

apt -y install lsb-release apt-transport-https ca-certificates
wget -O /etc/apt/trusted.gpg.d/php.gpg https://packages.sury.org/php/apt.gpg
echo "deb https://packages.sury.org/php/ $(lsb_release -sc) main" | sudo tee /etc/apt/sources.list.d/php.list
apt update
apt -y install php7.4
apt install php7.4-{bcmath,bz2,intl,gd,mbstring,mysql,zip}
systemctl restart apache2

That fixed it. It my of been the last line installing zip and things not sure what fixed it by itself.

So you could reinstall WordPress all you want would not fix this. It’s some setting in php.

-Raymond day

It was staying on “Initializing…” But when I did Windows key and H key again it cleared and then I started it again and it works that time not doing a “Initializing…”

-Raymond Day

Found out to this is free hit the Windows key and H and then you can talk to you computer and it will turn it into text right on the window you could use the keyboard on.

Testing it out more. I clicked it on to stop the voice to text and then did Windows Key and H again but it takes a long time saying “Initializing…” I guess I don’t turn if off like that.

-Raymond Day

Looked a long time and I found out I had Dragon software I had to get it repaired I had the EXE stored on a server with the email and password and stuff so it worked out good and I installed it on my Windows 10.

It works good can just talk to it and it puts it what you type just like you would type on the keyboard I was looking for this some plug-in but I guess there is none from WordPress.

It has a red or green mic icon on top of the screen can just click it to turn talking on or off red for off green when can talk.

So I can actually talk and this instead of typing it.

But looks like it cost about $300 or you can get a deal I paid for long ago I think I paid like $100 for looks like I get the latest version to it updated its version 15. Did not have to pay for the update.

Maybe Google voice did not do it because it would put Dragon talking software out of business not sure.

-Raymond Day

• This reply was modified 4 years, 1 month ago by RaymondDay.

Tested more plugins but they just don’t work. Some want to just save a backup on the same server. Or others just do errors can’t connect to the other server.

Right now I have to like hand do it.

Copy by selecting all. Edit the Publish date to be the same. Add any tages. The images and photos copy over and look good but they link to the main website but I want it to be a backup copy. On the main server have samba working so I go to the WordPress folder and find the same file and drag and drop it to the other WordPress to put it in the same place.

\\mainserver\All media drives\WD-3D-NAND-Stick\wordpress\wp-content\uploads\2020\08 then the file.

It be so much faster and easier with some plugin that would do all this. Takes a long time to do this.

-Raymond Day

Your DHCP server has a time when it does a renew of IP’s gave it about a day and then the name my work and not just the IP.

-Raymond Day

To copy WordPress to another I use Webmin to save the Database then I open that file in TextPad and do a search and replace all for the URL change. Save it then use Webmin on the other server to put that saved database in it.

-Raymond Day