Hemakumars

ivinco
in wordpress sphinx search 0.4 we need to run indexing manually and restart daemon every time we put a new post. can that be made automated after every post is published.

with regards
hemakumar.s

ivinco
my
sorted 0.4Mhits,44.9% done

is that a problem should it be 100%. or thats normal watch this

waiting for your reply.

man!
you are god! it works …….
thanks for your great support,people like you should always be active on our open source community..

with regards
hemakumar.s

we are actually using a shared system server(justhost.com) and not a dedicated one is that a problem..?

Thank you for your guidance we have configured in local-host, where as we are trying to implement in our website but everything is indexed properly.the problem is there are no search results.

I just had a warning report while indexing , watch this link,
We are eagerly waiting for your reply!

With regards
Hemakumar.S

This is the wordpress sphinx search plug-in 0.4 version indexing

Sphinx 0.9.8-dev (r1112)
Copyright (c) 2001-2008, Andrew Aksyonoff

using config file ‘/opt/lampp/sphinx/etc/sphinx.conf’…
indexing index ‘delta_wordpress’…
collected 0 docs, 0.0 MB
total 0 docs, 0 bytes
total 0.010 sec, 0.00 bytes/sec, 0.00 docs/sec
indexing index ‘main_wordpress’…
collected 49 docs, 0.0 MB
sorted 0.0 Mhits, 88.2% done
total 49 docs, 20272 bytes
total 0.019 sec, 1048949.63 bytes/sec, 2535.44 docs/sec
rotating indices: succesfully sent SIGHUP to searchd (pid=511.

Tell me the solution to show the number of documents

With regards

Hemakumar.S

root@TP046:/usr/local/bin# indexer -all
Sphinx 0.9.9-release (r2117)
Copyright (c) 2001-2009, Andrew Aksyonoff

using config file ‘/usr/local/etc/sphinx.conf’…
WARNING: no such index ‘-all’, skipping.
total 0 reads, 0.000 sec, 0.0 kb/call avg, 0.0 msec/call avg
total 0 writes, 0.000 sec, 0.0 kb/call avg, 0.0 msec/call avg

Hi,

Now i am trying debian way to install the sphinx search in the local host, sphinx conf modified with the database requirement and till indexer command in ubuntu 9.10 is done. once the indexer-all command given,data is showing zero.

If any expert knows the finishing touch of successful implementation of sphinx reply soon

Thanks and regards

Hemakumar.S

Could any one have the working example of Free open-source wordpress sphinx-search 0.4 plug-in installed perfectly in the wordpress domain.

Did you know about the setting up procedures in the webserver where the website will benefit immensely?

Could you tell me what are the requirements to successfully implement the sphinx search plug-in 0.4 in the hosting webserver.

Our wordpress domains all hosted by justhost.com. they are saying that the packages has to be changed for the sphinx plug-in to be installed in the webserver.

Do you have any successful mantra to do it in the webserver?

With regards

Hemakumar.S

Hai,

For the configuring Sphinx it shows the configuration done but the make,make install command shows some errors where as your valuable inputs on secure shell command in administrator is a great help but now in my position is that i have to successfully implement in local host which is nothing but lampp.

These are the measures i have tried in the ubuntu linux

fpuser@fpuser-desktop:/opt/lampp/sphinx/sphinx-0.9.8-svn-r1112$ sudo ./configure
checking build environment
————————–

checking for a BSD-compatible install… /usr/bin/install -c
checking whether build environment is sane… yes
checking for gawk… gawk
checking whether make sets $(MAKE)… yes
checking whether to enable maintainer-specific portions of Makefiles… no

checking for compiler programs
——————————

checking whether to compile debug version… no
checking for gcc… gcc
checking for C compiler default output file name… a.out
checking whether the C compiler works… yes
checking whether we are cross compiling… no
checking for suffix of executables…
checking for suffix of object files… o
checking whether we are using the GNU C compiler… yes
checking whether gcc accepts -g… yes
checking for gcc option to accept ANSI C… none needed
checking for style of include used by make… GNU
checking dependency style of gcc… gcc3
checking for g++… g++
checking whether we are using the GNU C++ compiler… yes
checking whether g++ accepts -g… yes
checking dependency style of g++… gcc3
checking for ranlib… ranlib

checking for header files
————————-

checking how to run the C preprocessor… gcc -E
checking for egrep… grep -E
checking for ANSI C header files… yes
checking for sys/wait.h that is POSIX.1 compatible… yes
checking for sys/types.h… yes
checking for sys/stat.h… yes
checking for stdlib.h… yes
checking for string.h… yes
checking for memory.h… yes
checking for strings.h… yes
checking for inttypes.h… yes
checking for stdint.h… yes
checking for unistd.h… yes
checking fcntl.h usability… yes
checking fcntl.h presence… yes
checking for fcntl.h… yes
checking limits.h usability… yes
checking limits.h presence… yes
checking for limits.h… yes
checking netdb.h usability… yes
checking netdb.h presence… yes
checking for netdb.h… yes
checking netinet/in.h usability… yes
checking netinet/in.h presence… yes
checking for netinet/in.h… yes
checking for stdlib.h… (cached) yes
checking for string.h… (cached) yes
checking sys/file.h usability… yes
checking sys/file.h presence… yes
checking for sys/file.h… yes
checking sys/socket.h usability… yes
checking sys/socket.h presence… yes
checking for sys/socket.h… yes
checking sys/time.h usability… yes
checking sys/time.h presence… yes
checking for sys/time.h… yes
checking for unistd.h… (cached) yes
checking expat.h usability… no
checking expat.h presence… no
checking for expat.h… no
checking iconv.h usability… yes
checking iconv.h presence… yes
checking for iconv.h… yes

checking for types
——————

checking for stdbool.h that conforms to C99… yes
checking for _Bool… yes
checking for an ANSI C-conforming const… yes
checking for inline… inline
checking for off_t… yes
checking for size_t… yes
checking whether time.h and sys/time.h may both be included… yes

checking for library functions
——————————

checking for pid_t… yes
checking for unistd.h… (cached) yes
checking vfork.h usability… no
checking vfork.h presence… no
checking for vfork.h… no
checking for fork… yes
checking for vfork… yes
checking for working fork… yes
checking for working vfork… (cached) yes
checking for stdlib.h… (cached) yes
checking for GNU libc compatible malloc… yes
checking for stdlib.h… (cached) yes
checking for GNU libc compatible realloc… yes
checking sys/select.h usability… yes
checking sys/select.h presence… yes
checking for sys/select.h… yes
checking for sys/socket.h… (cached) yes
checking types of arguments for select… int,fd_set *,struct timeval *
checking return type of signal handlers… void
checking whether lstat dereferences a symlink specified with a trailing slash… yes
checking whether stat accepts an empty string… no
checking for vprintf… yes
checking for _doprnt… no
checking for library containing setsockopt… none required
checking for library containing gethostbyname… none required
checking for library containing XML_Parse… no
checking for library containing iconv… none required
checking for library containing logf… -lm
checking for dup2… yes
checking for gethostbyname… yes
checking for gettimeofday… yes
checking for memmove… yes
checking for memset… yes
checking for select… yes
checking for socket… yes
checking for strcasecmp… yes
checking for strchr… yes
checking for strerror… yes
checking for strncasecmp… yes
checking for strstr… yes
checking for strtol… yes
checking for logf… yes
checking for LOCK_EX in sys/file.h… yes
checking for F_SETLKW in fcntl.h… yes

configuring Sphinx
——————

checking whether to compile with MySQL support… yes
checking for mysql_config… mysql_config
checking MySQL include files… -I/usr/include/mysql -DBIG_JOINS=1 -fno-strict-aliasing -DUNIV_LINUX -DUNIV_LINUX
checking MySQL libraries… -Wl,-Bsymbolic-functions -rdynamic -L/usr/lib/mysql -lmysqlclient
checking whether to compile with PostgreSQL support… no
checking whether to use 64-bit document/word IDs… no
checking whether to compile with libstemmer support… no
checking for libexpat… not found
configure: WARNING: xmlpipe2 will NOT be available
checking for libiconv… found
checking for iconv() arg types… char **

generating configuration files
——————————

configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating libstemmer_c/Makefile
config.status: creating sphinx.conf.dist
config.status: creating config/config.h
config.status: config/config.h is unchanged
config.status: executing depfiles commands

configuration done
——————

You can now run ‘make’ to build Sphinx binaries,
and then run ‘make install’ to install them.

fpuser@fpuser-desktop:/opt/lampp/sphinx/sphinx-0.9.8-svn-r1112$ make
Making all in src
make[1]: Entering directory `/opt/lampp/sphinx/sphinx-0.9.8-svn-r1112/src’
if test -d ../.svn; then svn info .. –xml | perl svnxrev.pl; fi;
make all-am
make[2]: Entering directory `/opt/lampp/sphinx/sphinx-0.9.8-svn-r1112/src’
make[2]: Nothing to be done for `all-am’.
make[2]: Leaving directory `/opt/lampp/sphinx/sphinx-0.9.8-svn-r1112/src’
make[1]: Leaving directory `/opt/lampp/sphinx/sphinx-0.9.8-svn-r1112/src’
Making all in test
make[1]: Entering directory `/opt/lampp/sphinx/sphinx-0.9.8-svn-r1112/test’
make[1]: Nothing to be done for `all’.
make[1]: Leaving directory `/opt/lampp/sphinx/sphinx-0.9.8-svn-r1112/test’
make[1]: Entering directory `/opt/lampp/sphinx/sphinx-0.9.8-svn-r1112′
make[1]: Nothing to be done for `all-am’.
make[1]: Leaving directory `/opt/lampp/sphinx/sphinx-0.9.8-svn-r1112′
fpuser@fpuser-desktop:/opt/lampp/sphinx/sphinx-0.9.8-svn-r1112$ make install
Making install in src
make[1]: Entering directory `/opt/lampp/sphinx/sphinx-0.9.8-svn-r1112/src’
if test -d ../.svn; then svn info .. –xml | perl svnxrev.pl; fi;
make install-am
make[2]: Entering directory `/opt/lampp/sphinx/sphinx-0.9.8-svn-r1112/src’
make[3]: Entering directory `/opt/lampp/sphinx/sphinx-0.9.8-svn-r1112/src’
test -z “/usr/local/bin” || mkdir -p — “/usr/local/bin”
/usr/bin/install -c ‘indexer’ ‘/usr/local/bin/indexer’
/usr/bin/install -c ‘searchd’ ‘/usr/local/bin/searchd’
/usr/bin/install -c ‘search’ ‘/usr/local/bin/search’
/usr/bin/install -c ‘spelldump’ ‘/usr/local/bin/spelldump’
make[3]: Nothing to be done for `install-data-am’.
make[3]: Leaving directory `/opt/lampp/sphinx/sphinx-0.9.8-svn-r1112/src’
make[2]: Leaving directory `/opt/lampp/sphinx/sphinx-0.9.8-svn-r1112/src’
make[1]: Leaving directory `/opt/lampp/sphinx/sphinx-0.9.8-svn-r1112/src’
Making install in test
make[1]: Entering directory `/opt/lampp/sphinx/sphinx-0.9.8-svn-r1112/test’
make[1]: Nothing to be done for `install’.
make[1]: Leaving directory `/opt/lampp/sphinx/sphinx-0.9.8-svn-r1112/test’
make[1]: Entering directory `/opt/lampp/sphinx/sphinx-0.9.8-svn-r1112′
make[2]: Entering directory `/opt/lampp/sphinx/sphinx-0.9.8-svn-r1112′
test -z “/usr/local/etc” || mkdir -p — “/usr/local/etc”
/usr/bin/install -c -m 644 ‘sphinx.conf.dist’ ‘/usr/local/etc/sphinx.conf.dist’
/usr/bin/install -c -m 644 ‘example.sql’ ‘/usr/local/etc/example.sql’
make install-data-hook
make[3]: Entering directory `/opt/lampp/sphinx/sphinx-0.9.8-svn-r1112′
mkdir -p /usr/local/var/data && mkdir -p /usr/local/var/log
make[3]: Leaving directory `/opt/lampp/sphinx/sphinx-0.9.8-svn-r1112′
make[2]: Leaving directory `/opt/lampp/sphinx/sphinx-0.9.8-svn-r1112′
make[1]: Leaving directory `/opt/lampp/sphinx/sphinx-0.9.8-svn-r1112′

Next step is Run indexing manually, once i click that it just shows Sphinx indexing Successfully rebuilt. but the real thing is it has to show the indexing details like configuring with the mysql by providing the original database size and how it compresses to small size as well as the processing time taken with the no of keywords searched by user will be in search log those kind of details definitely shown once the indexing done.

As per your guidance , it installed successfully the next step which is Run indexing manually where as once i click it shows Sphinx index successfully rebuilt.but the real process before this rebuilt message a fifteen lines of details will be displayed like the process of database and the indepth details of path.it doesn’t show anything.

After installing g++

these kind of errors coming

[moderator note: snipped errors as per the forum guidelines]