• Resolved nextstep

    (@nextstep99)


    Hello Patryk and many thanks for your plugin, it is very useful!

    I am having an issue where your plugin does not work with SiteOrigin page builder, although it does work on the pages where I am not actually building with SiteOrigin. ie just using native wordpress (and with the Classic Editor plugin.)

    Do you have any suggestions or workarounds I can try?

    Thanks again!

Viewing 8 replies - 1 through 8 (of 8 total)
  • Plugin Author Patryk

    (@prycpl)

    Hi

    I just add support to e.g. SiteOrigin Page Builder (higher priority for code adding function). Please update to 2.5.2 ??

    Best regards, Patryk

    • This reply was modified 4 years, 7 months ago by Patryk.
    Plugin Author Patryk

    (@prycpl)

    For better compatibility, I turned off the default high priority for functions, but I added an option in the settings that allows to set the required priority, so that everything will work properly in different configurations. In the plugin settings see the “function priority” option and enter there eg 999999. Ver: 2.6.1+

    • This reply was modified 4 years, 7 months ago by Patryk.
    Thread Starter nextstep

    (@nextstep99)

    Hello Patryk

    Many thanks for looking into this. I have upgraded to 2.6.1

    Apologies for the delay, but I’ve had to do some experimenting. This is what I’ve found

    If I don’t adjust “Set Custom Priority” (ie leave blank) the plugin:

    1 / works on standard word press pages and the shortcodes work — all as intended

    2 / If I don’t adjust “Set Custom Priority” (ie leave blank) the plugin works on SiteOrigin and your Inserter plugin, but the short codes do not work. ie all that is visible at the bottom of the page are the non functioning shortcodes.

    However, if I do adjust “Set Custom Priority” (lowest value = 11, highest value = 999999999999999999999999999999999999999999999999999

    3 / then the plugin still inserts, but shortcodes do not work on either the classic wordpress page or on the siteorigin page (or Gutenberg)

    FYI: I am using 2 lots of shortcodes in your plugin: “Adrotate” & “Shortcodes Ultimate” .

    Below are two links, with “Set custom priority” = 11: (The shortcodes are visible below the horizontal line.)

    A/ Classic Editor built Page:
    https://themillionaireteacher.com/contact/

    B / SiteOrigin built Page
    https://themillionaireteacher.com/testimonials-for-andrew/

    C / The effect I am trying to achieve can be seen a set up with SiteOrigin built Home Page. (also below the horizontal line).

    I have also tried deactivating all plugins except: Adrotate, Shortcode Ultimate, SiteOrigin and PRyC Inserter, but no luck there either.

    Many Thanks for your help,

    (I also tried using Theme Twenty Twenty, without luck.)

    • This reply was modified 4 years, 7 months ago by nextstep.
    • This reply was modified 4 years, 7 months ago by nextstep.
    • This reply was modified 4 years, 7 months ago by nextstep.
    • This reply was modified 4 years, 7 months ago by nextstep.
    Plugin Author Patryk

    (@prycpl)

    Hi.

    Thanks for the information. I added priorities to be able to fire BEFORE or AFTER another plugin as/if needed. The problem is when different plugins with different priorities are to work there (content and shortcode). Then there is a chance that our priority for one will be OK, and for another it will be too small or too high (because the shortcode must be changed to content).

    You can try to change the priority of the selected plugin (filters in WP), if the plugin allows it (call with a different priority).

    Alternative 01: You can also copy my plugin, slightly rename it (and probably the function names) so that two instances with different priorities will work.

    Alternative 02: Another field may be added to the plug with a separate function and priority. But it’s probably not in the coming days, because I have a temporary shortage of free time.

    Thread Starter nextstep

    (@nextstep99)

    Hi Patryk, thanks for the update. As this site only has a few pages to do I will simply create 2 columns with SiteOrigin and put in the adrotate codes. It will be far quicker and easier for me.

    FYI. I did attempt to send you 20 USD as thanks for your your effort & tidbits for your dogs. However, for whatever reason, I could not set United States as my country on the PayPal screen (with adblock and privacy badger disabled), PayPal kept reverting back to Poland; and then when I C&Pd the URL into Chrome, Google wanted me to do their inevitable CAPTCHA — after IDing Crosswalks, Hydrants, Bridges, Palmtrees and Motorcycles it wanted to keep going, so I stopped. Sorry. Maybe next time I’ll get lucky.

    Thanks again. D

    Thread Starter nextstep

    (@nextstep99)

    On further experimentation, it appears that it is the 2 shortcodes that won’t play together when in your plugin.

    I can use Your plugin and ShortCodes Ultimate
    OR
    I can use your plugin and Adrotate’s shortcodes
    OR
    I can use Shortcodes Ultimate & Adrotate shortcode

    BUT I cannot use all three together.

    So I will leave out Shortcode Ultimate and instead of having two columns, will just have one, which is how it ends up on mobile devices anyway.

    Thanks again, D

    Thread Starter nextstep

    (@nextstep99)

    Re previous post: This only occurs on standard (ie non Siteorigin) pages

    Plugin Author Patryk

    (@prycpl)

    Exactly as you write – the new option (priority) will help insert code before or after another plugin / page builder do own job (depending on your needs), but when we have 2 plugins with 2 extreme priorities, unfortunately, will not jump over without much combining.

    As for the dogs … Well, I will have to buy them myself ??
    Seriously, I checked it and it looks like the PayPal link should work. Anyway, thanks for your willingness ??

    Best regards, Patryk

Viewing 8 replies - 1 through 8 (of 8 total)
  • The topic ‘Use with SiteOrigin page builder’ is closed to new replies.