Multiple Fields

  • It is possibile to filter by multiple fields?
    ex
    [stickylist id=’1′ field=’1′ value=’1′, field=’2′ value=’5′]”

Viewing 7 replies - 1 through 7 (of 7 total)

  • So if i understand this correctly, I will be able to use 2 tables on 1 page and use the short code ” [stickylist id=’1′ field=’1′ value=’1′, field=’2′ value=’5′] ” to filter out fields on one of the tables on the page?

    Thread Starter esinformatica

    (@esinformatica)

    @stefanloots No, it is a matter of using a single table and to be filtered by 2 fields, currently the table can be filtered with a single field

    So i would not be able to put 2 tables on 1 page and simply filter out fields to get different results?

    one table shows the values on some fields and the other table values of other fields.

    All collected from the same form.

    please help me

    Thread Starter esinformatica

    (@esinformatica)

    @stefanloots You can do it! You can not filter two values in 1 table
    We wait for the author to give us some more info

    If you had a moment to look at the page..

    https://puttnwin.co.za/leader-board/

    .. you will quickly see what the issue is. the list does not allow me to view “hole in one” segment by date, descending and the “closest to the pin” descending by its value in one table. so I would like to put 2 tables from the same form on 1 page and only view the “Hole in One” values in the top table. basically hiding the “Closest to Pin” value in the top table. That way if I setup the list setting to be descending they will view in the correct way. ” Hole in one” at the top (descending) and “Closest to the pin” at the bottom (descending)

    I truly hop this make sense!!

    Thread Starter esinformatica

    (@esinformatica)

    HI @stefanloots
    Post the used shortcode here so we can see it

Viewing 7 replies - 1 through 7 (of 7 total)
  • The topic ‘Multiple Fields’ is closed to new replies.