Include all the category hierarchy in feed

Hi,

When you leave the default field mapping in place for the Skroutz template the entire category hierarchy / path should show:

https://www.dropbox.com/s/gx4thv75yaztlta/skroutz-path.png?dl=0

Hope this helps.

Does it take some time to refresh on the feed?
I even clicked on “manually refresh product feed” but I see no changes in my feed.

Hi,

It always takes time to refresh the feed at the feed need to process your products. Depending on your amount of products this could take anywhere from 10 seconds to a couple of hours.

So after it refreshed the feed, it is still wrong.

<category>Ελαστικα</category>
<category_path>Ελαστικα</category_path>

None of the above includes the full path to the category.

https://ielastika.gr/wp-content/uploads/woo-product-feed-pro/xml/1758b52c2f1104e412d7906716134bde.xml

Please check the settings here https://ibb.co/jwvgLjH

Hi,

Do your products have a category hierarchy? So something like this (and not just one-level deep)?
https://www.dropbox.com/s/l0nvp0k8fo13zxx/skroutz-path-1.png?dl=0

Because for us the above example results to this in the feed:
https://www.dropbox.com/s/ngkblhms6rf2ezp/skroutz-path-2.png?dl=0

Bear in mind that when your products sit in multiple non-hierarchal categories it will just pick one of those.

Hope this helps!

Ok! Thank you.
I have one more question. The availability now show “instock” and I would like it to show “?μεση παραλαβ? / Παρ?δoση 1 ?ω? 3 ημ?ρε?” which is shown on my product page.

https://ielastika.gr/product/tristar-snowpower-uhp-245-40-18-97v/

How can I do this?

Hi,

This rule should work:
https://www.dropbox.com/s/wgqbj9ixcivr086/availability-rule.png?dl=0

Hope this helps?

Hi,

Assuming the issue at hand has been resolved and our help is no longer needed we are going to close this topic for housekeeping reasons now.

Don’t hesitate to reach out to us again whenever you need our support.

Hi,

On a preexisting feed, I created a new rule based on this
https://www.dropbox.com/s/wgqbj9ixcivr086/availability-rule.png?dl=0
I update the feed but it does not show the changes. It still says “instock”.

Am I missing something?

Here is my feed https://carit.gr/wp-content/uploads/woo-product-feed-pro/xml/ujS1t5SyhwPir2q9T6djgCBSDRIL0wN1.xml

When I click on “update feed” it flashes “processing (0%)” and after a couple of secs it says ready but nothing changes.

If I add new products, they do appear on the feed but the new rule is not applied.

I created this for Skroutz.gr

• This reply was modified 4 years, 6 months ago by bigdrop.gr.
• This reply was modified 4 years, 6 months ago by bigdrop.gr.
• This reply was modified 4 years, 6 months ago by bigdrop.gr.

Here is my rule https://prnt.sc/ulm5fx.

General feed settings https://prnt.sc/ulm5y0.

Field mapping settings https://prnt.sc/ulm6iq.

Can you tell me what am I missing?

Yes, there should be a whitespace in “instock”, it should be “in stock”.

I followed your previews answer, where you pointed me to this…
https://www.dropbox.com/s/wgqbj9ixcivr086/availability-rule.png?dl=0

So I changed it to this:
https://prnt.sc/ulpwfe

I clicked the refresh button, it just get stock to 29%. And the feed is not updated.

After 5 hours it still flashes at 29% and not updating.

Changes are you are running into server limitations such as a maximum execution time limitation or maximum CPU usage limitation. Please check today’s WooCommerce fatal error logs to see if any of those errors are in there.

Instructions on where to find these fatal error logs are here:
https://docs.woocommerce.com/document/finding-php-error-logs/

When you do find those kind of errors you should consider lowering the batch size of the plugin so it uses less server resources. Please see: https://adtribes.io/batch-size-configuration-product-feed/

So I fixed this!

The field mapping was wrong.
It was like this: https://prnt.sc/ulm6iq

And I changed it to this:
https://prnt.sc/ulwomc

And it works.