Dymo LabelWriter 450

  • Resolved [email protected]

    (@piapianybergse)


    11 months, 1 week ago

    I cannot find the correct measurements to print through my DYMO LabelWriter 450 with the settings H28mm x W89 mm. Is it possible to work around this?

Viewing 1 replies (of 1 total)
  • Plugin Author Dima Pavlenko

    (@dima411)

    1. Make sure you installed the printer official drivers, it’s a very important step, since the driver is usually the one that tells the operating system which paper sizes this printer supports.
    2. Next step is to set the printer “paper”/”page” size properly in operating system. For example on Windows 10 > Start button> type “Printers & Scanners” and click > select the printer > Manage > Printing Preferences – explore the settings there, most likely that’s where the label size should be chosen (if the driver was installed and it’s a label size the printer supports, as these stickers are very diverse from brand to brand).
    3. Make sure to set the height of the label in plugin settings slightly smaller (usually 1mm is enough) – since the “full” size may overflow in Chrome, as it thinks the page is “too large” for that same size (so just decrease the label size setting slightly to prevent this edge case).
    4. After generating labels in Chrome print dialogue > More Settings > Margins set to None – this should prevent overflows caused by the print dialogue default layout/print settings.
Viewing 1 replies (of 1 total)
  • The topic ‘Dymo LabelWriter 450’ is closed to new replies.