Default Variations not working properly

Hi George,

You also need to enable the “Include all product variations” slider.

Now bear in mind that Skroutz has some very specific requirements when it comes to adding variations to feeds so changes are that you might not be able to find all variations in your feed anyhow, please see: https://adtribes.io/creating-woocommerce-product-feed-skroutz/

Hi,

Thanks for the response.

When I check All Variations it stops at 30%.

Best regards,
George

Hi George,

Can you share the plugin debug.log URL with us? Instructions on how to retrieve it can be found here: https://adtribes.io/send-your-debug-log-to-support/

Hi,

Here is the debug log:
https://fshome.gr/wp-content/uploads/woo-product-feed-pro/logs/debug.log

Thanks for sending over your debug.log.

Are you sure your feed is not updating? The debug.log shows your feed is configured to refresh on a daily interval and these are the last updates of the feed:

[21 Feb 2021 10:32] => 16086
[22 Feb 2021 07:36] => 16094
[06 Mar 2021 12:55] => 6620
[07 Mar 2021 21:33] => 6664
[08 Mar 2021 13:05] => 6665

So it seems it still updated today?

It also shows this status, implying that it finished succesfuly updating?

[running] => ready

yes it is stuck for hours at 30%:
https://prnt.sc/10g98vr

Strange, thats not what the debug.log says (it says ready). Are you using any 3th party caching plugins maybe? If so, make sure to clear/flush the caching of that plugin and also clear the caching of your browser to see if that makes any difference.

I have cleared the cache, but nothing changes.

I have disabled the WP-Cron and I run it with server cron.
This is my server’s policy.
Is this maybe an issue?

Yes, that’s definitely an issue. Our plugin is using batches and needs the WP-cron to trigger a next batch. This process continues until the feed is done processing.

Now depending on how often you trigger cron hooks with your external cron hooks it could take a lot of time before the next batch is started. See this blog post: https://adtribes.io/can-i-disable-the-wp-cron-and-run-a-server-cron-and-still-use-your-plugin/

This is the time and command I am using:

Time Command
*/1 * * * * wp cron event run –due-now –path=/kunder/fshome_6265/fsphph_8909/public/ –quiet

What should I change?

Unfortunately we are not a cron experts but you should take care it is fired at least every five minutes if you want your feed to be finished in 15 to 20 minutes.

Actually cron job is triggered every 1 min.
I just double checked it with the server support.

So what else could be?

We are not sure, it must be cron related as somehow it never passes the first (start-up) batch. Did you already try disabling and re-enabling the plugin as that will reset all cron hooks?

I did, also changed the feed at hourly and still it stucks at 30%.

Anything else?

All other feeds have the same choices enabled but they are working.

The only difference between this skr feed and all others is that it proccessing more products, because I exclude from the other feeds some products.

But, same options are enabled.

It seems that it stucks because it has a lot of products?