Can’t add posts after installation

Hi @mirek007, thanks for getting in touch.

Wordfence should be in Learning Mode after installation, which should prevent false-positive blocks on normal operations. If it isn’t, take a look at that link and reenable it for a period to see if it helps with adding posts.

As for the immediate redirect, that’s the help page for Optimization, which is linked inside the WordPress admin dashboard if you haven’t yet optimized, but isn’t set to redirect from any pages automatically. Have you optimized the firewall using the wizard in Wordfence > Firewall? If not, it might be worth doing so to see if the redirect stops happening.

Let us know how you get on,
Peter.

Hello, unfortunately nothing is working. So I switched the gateway from learning mode to enabled, now I will add posts, but all the images have absolutely disappeared on the whole site after I did that.
Where is the problem?

Hi @mirek007, thanks for letting me know.

If images are being loaded into the front end using a plugin or custom script, they may be seen as a false-positive. But again I’d suggest potentially reenabling Learning Mode to solve that.

When you load a page with missing images, do you see any blocked actions immediately afterwards in your Live Traffic? When clicking any block line (or “eye” icon), it will state the block reason in red text.

Sometimes, depending on the issue, an “ADD PARAM TO FIREWALL ALLOWLIST” button appears in this section which you can click to allow these types of request in future. Paste us what you see if you’re not sure how to solve the reason being given by Wordfence.

Thanks again,
Peter.